ឧទាហរណ៍នៃបញ្ហាទូទៅនៃម៉ាស៊ីនបំផ្ទុះគ្រាប់បែក

- 2021-06-05-

តាមរយៈការយល់ដឹងពីមុននិងការយល់ដឹងស៊ីជម្រៅរបស់យើងម៉ាស៊ីនបំផ្ទុះគ្រាប់បែក, there will still be some novices who do not fully understand the ម៉ាស៊ីនបំផ្ទុះគ្រាប់បែក. At the same time, it is also popularized based on what we have not mentioned before. The following are some examples of our problems and polishing The technical requirements for shot blasting of the ម៉ាស៊ីនបំផ្ទុះគ្រាប់បែក, etc., I hope you will learn something and strengthen your own practical deficiencies.
1. កំពុងរកមើលម៉ាស៊ីនបំផ្ទុះគ្រាប់បែកតាមទស្សនៈវិជ្ជាជីវៈតើវាជាម៉ាស៊ីនប្រភេទអ្វី? តើធ្វើដូចម្តេចដើម្បីជ្រើសរើសរោងចក្រផលិតនិងកែច្នៃគ្រឹះ?

The ម៉ាស៊ីនបំផ្ទុះគ្រាប់បែក itself is a surface treatment equipment, dedicated to solve the problem of imperfect surface of metal objects, and can remove the rust layer, rust spots, oxidation, painting, renovation, etc. on the surface of metal objects. For the foundry industry, performance, stability and quality should be considered when choosing a ម៉ាស៊ីនបំផ្ទុះគ្រាប់បែក. Secondly, considering the price, because there are more ម៉ាស៊ីនបំផ្ទុះគ្រាប់បែកs in the market, you can choose to shop around. Only then can there be price comparisons.

២. តើអ្វីជាតម្រូវការបច្ចេកទេសសម្រាប់ការបាញ់កាំភ្លើង? តើទិដ្ឋភាពសំខាន់ៗមានអ្វីខ្លះ?

ចំណុចមួយគឺបញ្ហារបស់អេម៉ាស៊ីនបំផ្ទុះគ្រាប់បែក itself. On the basis of shot blasting technology, the ម៉ាស៊ីនបំផ្ទុះគ្រាប់បែក must be stable enough, and what kind of ម៉ាស៊ីនបំផ្ទុះគ្រាប់បែក is used for example: steel shot, iron shot, aluminum shot , And what is the size of the pellets, and then what is the ejection speed when we shot blasting. The professional name is called ejection flow. Different shot blasting intensities have different throwing effects, and the efficiency will be corresponding. Get the same change.

3. What should I do if the ម៉ាស៊ីនបំផ្ទុះគ្រាប់បែក misses the shot? How to solve it?
ប្រសិនបើម៉ាស៊ីនបំផ្ទុះគ្រាប់បែក is in use, it is likely to be caused by the shape of the workpiece, but this is not an absolute factor. Usually, there will be more probability at the exit of the ម៉ាស៊ីនបំផ្ទុះគ្រាប់បែក. According to this point, we will cause Pay attention, and deal with the missing blasting material at any time during the working time, so as not to form a pile, so as not to affect the normal shot blasting progress.
The above three points are reference for common problems of ម៉ាស៊ីនបំផ្ទុះគ្រាប់បែកs, which are very useful for production and processing manufacturers. According to strict production, the shot blasting effect will not be bad, so we must also think from a comprehensive perspective in order to achieve ourselves The expected effect.